Gvn Art Illuminated LED Tablet A3 (59G2200001547919)

Installation and Operation: 1. Remove the clear protective plastic film on the illuminated drawing pad. 2. Connect the USB cable to the computer or 5V phone adapter. 3. Tap the On/Off dimmer located in the upper left. 4. Adjust the light level by pressing the On/Off dimmer. Levels increase to 3 levels, each touch changes one level. 5. Two red magnet pins secure the paper while drawing. Attention: Do not cut or use sharp tools on the work surface as this will scratch the surface. A clear cutting mat is recommended. Important Instructions: When using this LED Light drawing tablet, always follow basic precautions, including the following: 1. Read and understand all instructions before use. 2. Supervision is required when used by or near children. Do not leave unattended during use. 3.Do not use this equipment with a damaged power cord or if the unit has been dropped or otherwise damaged until it has been examined by an electrician. 4.If an extension cable is required, make sure it has a suitable current rating. Less amperage than this equipment may overheat. 5.Always unplug the equipment from the electrical outlet when not in use. Always unplug the power adapter by holding it and unplugging it from the outlet, never pull the cord to remove it as this may damage the adapter or outlet. 6. Do not immerse in water. If equipment receives water damage, do not use it until it has been inspected by an electrician. Care : Clean the surface with a soft cloth and a nonabrasive cleaner such as dishwashing liquid. Never apply cleaner directly onto the Light Pad as it may leak into the unit and cause damage.”